0
Helpline : (818) 235-1095
Resellers register here
Log In My Account
0 Shopping Cart $0.00 0 Shopping Cart $0.00

2010-2015 HONDA CROSSTOUR VSA MODULATOR (ABS MODULE) REPAIR

Reinstallation Warning

2010-2015 HONDA CROSSTOUR VSA MODULATOR (ABS MODULE) REPAIR

$199.00

After checkout, you will send us your ABS pump control module. We will inspect it, install our repair kit, perform final testing, and ship it back to you. Average repair time is 1-2 business days.

Please do not send the pump - send only the control module as it is shown in the photo

 

Flexible delivery option
100% tested
Lifetime Warranty

Known Problems:

  • DTC 121-11: VSA Solenoid Valve Malfunction
  • DTC 122-11: VSA Solenoid Valve Malfunction
  • DTC 123-11: VSA Solenoid Valve Malfunction
  • DTC 124-11: VSA Solenoid Valve Malfunction
  • DTC 81-19 Yaw rate sensor inside malfunction
  • DTC 66-11: Pressure Sensor Circuit Malfunction
  • DTC 66-13: Pressure Sensor Malfunction
  • DTC 32-11: ABS Solenoid Valve Malfunction
  • DTC 33-11: ABS Solenoid Valve Malfunction
  • DTC 34-11: ABS Solenoid Valve Malfunction
  • DTC 35-11: ABS Solenoid Valve Malfunction
  • DTC 36-11: ABS Solenoid Valve Malfunction
  • DTC 37-11: ABS Solenoid Valve Malfunction
  • DTC 38-11: ABS Solenoid Valve Malfunction

Compatible Part Numbers Include:

  • 9T12E-0630
  • P6VAA
  • 9T12E0630P6VAA
  • TP6A0, TP7A5
  • 0F18E-1010
  • 0D19E-0707
  • H4B0D191011
  • S0323
  • P7VAA
  • C95C
  • GF30
  • 1449A

 It is your mechanic's responsibility to pinpoint the problem to the ABS pump control module. All possible causes for ABS system failure (i.e. speed sensor/s, wiring issues, power and ground supplies) must be eliminated prior to sending your module for repairs. Please note, not all modules are repairable.

Repairs done to your module are covered by our lifetime warranty. Please read full warranty terms and conditions.

There are 2 metal contact prongs connecting the VSA modulator (ABS module) to the hydraulic pump. Sometimes those contacts will come out on the module side during removal. THE CONTACT PRONGS MUST BE INSTALLED ON THE PUMP SIDE BEFORE RECONNECTING THE MODULE. If you do not install the module properly, the contacts will bend and touch each other, creating an electrical short that will destroy the VSA modulator. If your module is destroyed as a result of not following these instructions, your warranty will be voided. Please be advised.

After our repairs have been made, your module will be ready to install back on your vehicle, no coding or programming required.

Menu